Hornady Lock-N-Load Powder Measure with Case-Activated Pow Manual de usuario descargar pdf (Pagina 12)

- 11 -

Step 2: Upper Bracket Assembly

Slide the Upper Bracket Assembly onto the Powder Measure.

Engage Drive Link Pin (#10) into the Rotor Arm Slot.

Adjust the position of the Upper Assembly so that the drive link pivot is across from

the centerline.

Tighten the two Button Head Cap Screws (#1) and (#9). The longest screw 10-32 X

1.25 goes in the front hole. Screw on the Spring Nut (#13) to the end of the 10-32 X

1.25 screw.

Fig. 2: Upper Bracket

Assembly.

PIVOT LOCATED

ACROSS FROM

ROTOR CENTERLINE

ROTOR “CENTERED”

UPPER ASSEMBLY

DRIVE LINK PIN

L-N-L POWDER MEASURE

ROTOR

ARM SLOT

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Hornady Lock-N-Load Powder Measure with Case-Activated Pow Manual de usuario Pagina 12