Hornady Lock-N-Load Case Feeder Manual de usuario descargar pdf (Pagina 12)

Placing the Feed Bowl Hopper

on the Assembly

Select the Case Feed Plate for your application.

Refer to page 13.

To install the Case Feed Plate, place Feed Plate over the

motor shaft and rotate until pawls on motor shaft engage the

two slots on the bottom of the Feed Plate.

Slide Case Feed Hopper on to the Square Tubing and the

Feed Tube.

Square Tubing

Case Feed Plate

Feed Tube

Maintenance of the Lock-N-Load

AP Case Feeder

As with all equipment, proper and routine maintenance will provide smooth operation and a longer life for your reloading

press and Case Feeder. At the end of each reloading session, wipe off all spilled powder, any dirt, etc., from the press.

Check all moving parts for dirt or spilled powder and remove with a clean rag.

- 12 -

ASSEMBLY

ASSEMBLY: CASE FEEDER

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Hornady Lock-N-Load Case Feeder Manual de usuario Pagina 12